Unigraphics CAD, design, engineering, FEA and data translation services from

bestCADsolutions, Inc.

The internet's best off site engineering source!

bestCADsolutions Unigraphics NX series capabilities are state of the art. Call us today for a free quotation or to discuss your specific needs. 1-715-247-5827

We support the following versions of Unigraphics: NX7.5, NX7, NX6, NX5, NX4, NX3, NX2, NX, V18, V17. Prior releases to V17 are available by special request.

      Unigraphics NX automotive support services
 - Automotive engineering
 - Black box design
 - Brakes, calipers, control arms
 - Class "A" surfacing of exterior panels, mirrors, front clips, deck lids
 - Clips
 - Composites
 - Electronics: Engine controllers, central bus, interior control systems, ABS
 - Data translations to, or from, Unigraphics, Catia V4, V5, SolidWorks 2007, 2008, 2009, 2010, 2011, Solid Edge V17, V18, V19, V20, ST1, ST2, ST3
 - Design services
 - Door panels
 - Drafting (in model space or in drafting space)
 - Engineering services
 - Exterior styling
 - Finite Element Analysis - FEA (by registered professional engineers using Ansys)
 - GM Toolkit, Covisant, Supply Power
 - Interior seating, styling, storage armrests, knobs, HVAC, hush panels, clips,
 - Materials: aluminum, composites, glass, plastics, steel, etc.
 - Rapid prototypes, Stereolithography (SLA)
 - Software packages: Catia (V4, V5), Unigraphics NX series, Solid Edge and SolidWorks
 - Test stands
 - Tonneau covers, liftgates
 - Tooling, tool design
 - Wire harness routing, 3D routing, 2D form boards for manufacturing
 		  
      Unigraphics NX commercial airplane support services
 - Airfoil designs
 - Airframe engineering
 - Black box design
 - Composite materials
 - Control systems: Cockpit, doors, launch, monitoring equipment, routing, seals, weapons, wiring
 - Data translations to, or from, Unigraphics (all versions), Catia V4, V5, SolidWorks 2007, 2008, 2009, 2010, 2011, Solid Edge V17, V18, V19, V20, ST1, ST2, ST3, ProEngineer, Wildfire I, II, III, IV, Inventor 2011, 2012, Autodesk products.
 - Design
 - Drafting (in model space or in drafting space)
 - Engineering
 - Exterior sealing, gaskets, flat blank patterns for tooling rubber seals
 - Exterior styling
 - Flat patterns
 - Finite Element Analysis - FEA (by registered professional engineers using Ansys)
 - Flight gear, helmets, heads up displays, noise reduction equipment, acoustics
 - Gaskets, exterior sealing, bay doors
 - Interior styling, seating, storage, structural, galley
 - Landing gear, hydraulics
 - Materials: aluminum, composites, titanium, plastics, etc.
 - Software packages: Catia (V4, V5), Unigraphics, Solid Edge and SolidWorks
 - Test stands
 - Tooling and tool design
 - Turbine designs for GE, Pratt Whitney, Rolls Royce
 - Wire harness routing, 3D routing, 2D form boards for manufacturing

  
      Complete support services for military and space vehicles
 - Avionics
 - Black box designs
 - Control systems: Cockpit, doors, launch, monitoring equipment, routing, seals, weapons, wiring, flight control
 - Data translations to, or from, Unigraphics, Catia V4, V5, SolidWorks 2007, 2008, 2009, 2010, 2011, Solid Edge V17, V18, V19, V20, ST1, ST2, ST3, ProEngineer, Wildfire I, II, III, IV, Inventor 2011, 2012, Autodesk products.
 - Design
 - Drafting (in model space or in drafting space)
 - Engineering
 - Electrical control systems
 - Exterior sealing, gaskets
 - Exterior styling
 - Finite Element Analysis - FEA (done by registered professional engineers)
 - Flight gear, helmets, heads up displays, noise reduction equipment, sound systems, switches
 - Interior styling, seating, storage, structural, restraint systems
 - Materials: aluminum, composites, glass, titanium, plastics, etc.
 - Oxygen systems
 - Platforms (work and launch)
 - Research laboratories
 - Rocket designs, boosters, nozzles, solid fuels, pumps, controls, helium pressurization, seals, enclosures
 - Safety products, research, development
 - Solar systems and solar arrays
 - Software packages: Catia (V4, V5), Unigraphics (all versions), Solid Edge and SolidWorks, Inventor, KeyCreator, Cadkey, AutoCAD, etc.
 - Telescopes, viewers, prisms, vacuum chamber design, vacuum deposition
 - Test stands
 - Tool design
 - Wire harness routing, 3D routing, 2D form board layouts for manufacturing
  

 

To discuss your aerospace engineering project call 1-715-247-5827

CAD design services,  off site design services,  off-site CAD engineering services,  offsite CAD, design and engineering services,  off-site data translations., off site drawing conversions, aerospace engineering, automotive engineering, medical products, consumer products. Finite Element Analysis (Ansys V13).

Open Directory Project at dmoz.org

bestCADsolutions, Inc.

Somerset Design Center, 347 Rice Lake Road, Somerset, WI 54025

Phone: 1-715-247-5827

Fax: 1-715-247-4121

Email contact: data@bestCADsolutions.com

bestCADsolutions, Inc.
Copyrights: 2002-2012. All rights reserved.

 

bestCADsolutions can convert data to or from any of the following formats:

ACIS: .sat format

Autodesk: DXF, DWF and DWG formats. Backward compatible to 1997, 2000, 2002, 2004, 2006, 2007, 2008, 2009, 2010, 2011

Autodesk Inventor: .ipt, .iam, .idw formats Versions 5.3, 6, 8, 10, 11, 12. Backward compatible to 1997, 2000, 2002, 2004, 2006, 2007, 2008, 2009, 2010, 2011

Autodesk Mechanical Desktop: dxf, dwf and dwg formats. Backward compatible to 1997, 2000, 2002, 2004, 2006, 2007, 2008, 2009, 2010, 2011

Catia V4: .model, .exp, .gz, .tar, .zip, .pkg, .session, .library,  flataix1, exp formats, .mod, .cgm, .gl, .gl2, .hpgl, .bmp, .3dxml, .asm, .cdd, .ps, .stbom, .ctf, .cft, .dwg, .dxf, .igs, .IGES, .iges, .stp, .STEP, .step, .hpgl

Catia V5: .CATPart, .CATDrawing, .CATProduct, .CATfct, .CATKnowledge, .CATMaterial, .CATRaster, .CATShape, .catalog, .gl, .gl2, .session, .ctf, .cft, .dwg, .dxf, .igs, .IGES, .iges, .stp, .STEP, .step, .hpgl

Computer Graphics Metafile: cgm format. CGM via Unigraphics NX2, NX3, NX4 NX5, NX6, Catia V4, V5, Solid Edge V19, V20, SolidWorks 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

Inventor 10, 11, 12, 2008, 2009, 2010, 2011

Dassault Systems CATIA V4, V5:  .catalog,  .CATDrawing, .CATfct, .CATKnowledge, CATMaterial, .CATPart, .CATProduct, .CATRaster, CATShape,  .session, flataix1, exp formats, .mod, .model. Catia V5R14, V5R16, V5R17, V5R18, V5R19,  V5R20, V5R21, DL1,  V4

EMS: all ems formats

Hewlett-Packard Graphics Language: .gl, .gl2, .plt and .hpgl formats

IGES 2D or 3D neutral translations: .igs. .iges or .IGES formats. IGES and igs data outputs as 3D solid model geometry, wireframe or surface data. This process retains your assembly structure.

Image formats: Corel 12, Adobe Acrobat Professional (3D and 2D output formats), All Microsoft products,

Mastercam, .igs, .iges, .IGS, .IGES, X5MU1,

MDS: .mds format

Parasolid: x_b and x_t formats for all CAD packages

PTC Pro/ENGINEER: asm and prt formats. versions: release 18, ProE 20001, ProE 2001, Wildfire, Wildfire 2 (II), Wildfire 3 (III), Wildfire 4 (IV)

Solid Edge: .asm, dft, .par, .psm, and .pwd weldment formats. Running V14, V16, V17, V18, V19, V20, V21

SolidWorks: .sldprt, .sldasm, etc. 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

Stereolithography files: .stl, .sat, .txt. Available in any release.

STEP 203 or step 214 neutral translations: .stp, .STEP or .step

Unigraphics by Siemens Corporation: .prt format for all versions v1,v2,v3,v4,v5,v6,v7,v8,v9,v10,v11,v12,v13,v14,v15,v16,v17,v18,v19 NX, v20 NX2, v21 NX3, v22 NX4, v23 NX5, v24 NX6, v25 NX7, NX7.5

Virtual Reality Modeling Language - VRML: wrl and wrml formats for version 1.0 and 2.0+.

XML: .xml and xmlplm formats

XVL: .xvl format

Any format to or from AutoCAD R13,R14, R16, 2000, LT, 2002, 2004, 2006, 2008, 2009, 2010, 2011, Catia, Inventor, Mechanical Desktop, Solid Edge, SolidWorks, Unigraphics, etc.

Finite Element Analysis services using Ansys 13 and SolidWorks Cosmos.

Open Directory Project at dmoz.org

Key word profiles:

bestCADsolutions is a CAD, design,  engineering, FEA and data translation services company supplying the internet's best services in data translation technology.

CAD systems: Cadkey, 97, 98, V17, V19, V20, V21, Key Creator,  V4,  V5, V6, V7,  V7.5, V8, Unigraphics NX Series CAD,  v17,  v18,  NX,  NX2,  NX3,  NX4,  NX5, NX6, NX7, NX7.5, Catia, V4, V5,  CADDS, AutoCAD, R14, R16, R17, R18, 2000, 2000LT, 2004, 2006, 2008, 2009, 2010, 2011, Autodesk, AutoCAD 2000,  LT,  ProE, Pro Engineer, Wildfire, Wildfire 2, Wildfire 3, Wildfire 4, Inventor,  V6,  V8,  V10, V11, V12, 2008, 2010,  solid, edge,  Solid Edge,  v12,  v14,  v16,  v17,  v18, v19, v20, v21, velocity series, CAD,  solid, works,  SolidWorks CAD,  2004,  2005, 2006, 2007, 2008, 2009, 2010, 2011, TurboCAD, turbo, CAD, v10, v11, v12, v13, v14, v15, v16, Synchronous Technology (Siemens). Convert Catia files

If you don't see your CAD system on the above list, fret not, we probably have it.

CAD design services,  off site design services,  off-site CAD engineering services,  offsite CAD design and engineering services,  off-site data translations., off site drawing conversions, aerospace engineering, automotive engineering, medical products, consumer products.

bestCADsolutions, Inc.

Somerset Design Center, 347 Rice Lake Road, Somerset, WI 54025

Phone: 1-715-247-5827

Fax: 1-715-247-4121

Email contact: data@bestCADsolutions.com

bestCADsolutions, Inc.
Copyrights: 2002-2012. All rights reserved.